Live Streaming
Broadcast your services live to anyone with the link, in 1080p or 4K. Pay only for the minutes you stream: no monthly fee, and no charge per viewer.
- Pay as you go
- Redundant transcoding
- 24/7 Support
A Sunday with 1st Flock streaming
- 1
Turn streaming on.
Choose Streaming when you sign up, or, if you already use 1st Flock, open Streaming in the Hub and click Enable streaming. Nothing is charged until a stream runs.
- 2
Schedule a stream, or go live now.
Give it a title and pick 1080p or 4K. A scheduled stream starts itself at the time you booked, so nobody has to remember to press a button on Sunday morning.
- 3
Point your encoder at it.
Paste the SRT URL into OBS Studio, or the SRT server, Stream ID and passphrase into another encoder. SRT is encrypted and copes with a shaky internet connection; an encoder without SRT can use RTMPS, which is encrypted too. You can connect up to an hour early to check the picture.
- 4
Share your watch page.
One link that never changes, such as 1stflock.com/watch/your-church. It plays the service while you are live and shows the next scheduled stream in between.
Pay as you go · no monthly fee
Pay only for what you stream
Each stream is priced per stream-hour, by quality.
- 1080p streamFull HD. The right choice for nearly every service.
- 4K streamUltra HD, for a 4K camera and an internet connection that can carry it.
- No monthly fee, and no blocks or bundles of hours to buy.
- Billed once a month, after the month ends, for the minutes you streamed.
- Each stream is billed per minute, rounded up, with a five-minute minimum.
- No charge per viewer. Viewers watch free, without an account.
- If no video reaches us for 15 minutes, we end the stream and stop billing — so a stream nobody is sending to never runs up a bill.
Everything a service needs to go out live
Run it from the Hub: schedule, connect, share, and see what each stream cost.
Schedule or go live now
Book this Sunday's service ahead of time, or start a stream the moment you need one.
Works with your encoder
Any encoder that sends SRT, which we recommend, or RTMPS. Both are encrypted. Tested with OBS Studio; vMix, Wirecast and hardware encoders take the same settings.
One watch page, or your own website
Share a single link that never changes, or put the player on your own website with one code copied from the Hub.
Recordings saved to Files
Every broadcast is recorded and saved to your church's Files as a video file, when your church has Files storage (it comes with Church Management).
Built to stay on air
Every stream is transcoded redundantly, on more than one server at once, so the loss of one server does not take your stream down.
You decide who goes live
Streaming has its own permissions in the Hub, so the person at the sound desk can run a service and the treasurer can see what it costs.
For resellers and developers
Offer live streaming to your own customers
If your business streams for its own customers, run 1st Flock streaming from your own software with the Streaming API. You pay the same per-hour rates, and every stream carries your own customer reference, so you can bill each customer for exactly what they used.
- Every stream made with your keys is billed on your organization's monthly streaming invoice, at the same per-hour rates.
- Tag each stream with your own customer reference (
customer_ref). - Per-stream minutes and cost, by customer reference, from the API and in the Hub.
Get an API key
- 1
Sign up and choose Streaming.
Streaming can be the only thing you choose. Streaming is billed to a card each month, so sign up with a card. Nothing is charged until a stream runs.
- 2
Open Streaming in the Hub.
If you chose Streaming at sign-up it is already on. Already a 1st Flock customer? Open Streaming and click Enable streaming on the Live streaming card; you need a card on file.
- 3
Create a key.
On the API access card, click Create key, give the key a name such as Production, and confirm your password.
- 4
Copy the key and keep it safe.
The key is shown once, under Your new API key. Store it with your server's other secrets. If it is lost, revoke it on the same card and create another.
Questions about streaming
- What counts as a minute?
- Every minute a stream runs, rounded up to the next whole minute, with a five-minute minimum per stream. The clock starts when your video first reaches us, or, for a scheduled stream, at the time you booked, because that capacity is held for you from then. If no video ever arrives, we end the stream after 15 minutes and those 15 minutes are billed, because that capacity was held for you. It stops when the stream ends. A service that runs 61 minutes and 10 seconds is billed as 62 minutes; a three-minute test is billed as five.
- What happens if we schedule a stream and nobody connects?
- A scheduled stream starts itself at the time you booked. If no video reaches us within 15 minutes, we end it, and those 15 minutes are billed. Cancel before the start time and there is no charge at all. Your encoder can connect up to an hour early to check the picture and sound, and that hour is not billed.
- What is the difference between 1080p and 4K for our encoder?
- For 1080p, send 1920×1080 at 30 frames per second, about 6,000 Kbps of video, from a connection with 10 Mbps or more of upload. For 4K, send 3840×2160 at 30 frames per second, about 16,000 Kbps, from a connection with 25 Mbps or more of upload. Either way, send over SRT if your encoder offers it, and set the keyframe interval to 2 seconds. 4K costs more per hour and only helps when your camera, your connection and your viewers can all carry it, so if you are not sure, choose 1080p.
- Are viewers charged?
- No. You pay for the minutes you stream, not for how many people watch, and viewers do not need an account.
- Is there a monthly fee?
- No. There is no subscription, no block of hours and no bundle to buy. A month you do not stream costs nothing for streaming.
- When are we billed?
- On the 1st of each month, for every stream in the month just ended, to the card on file. A stream counts toward the month in which it ends. Each bill is in the Hub, stream by stream.
- Can we put the player on our own website?
- Yes. In the Hub, under Your watch page, click Copy embed code and paste it into your website's embed or HTML block (WordPress, Squarespace, Wix…). The player fills the width you give it and shows the live service, or, between services, when the next one starts. A private stream asks for its access code inside the player.
<div style="position:relative;width:100%;padding-top:56.25%;"><iframe src="https://1stflock.com/watch/your-church?embed=1" title="Your Church live stream" width="560" height="315" style="position:absolute;top:0;left:0;width:100%;height:100%;border:0;" allow="autoplay; fullscreen; picture-in-picture" allowfullscreen loading="lazy"></iframe></div> - What happens if a server fails during a service?
- Every stream is transcoded redundantly, on more than one server at once, so the loss of one server does not take your stream down. If the server receiving your video fails, your encoder reconnects on its own, within seconds. Viewers watch about a minute behind the room, so they keep watching what has already reached us while it does: the picture does not freeze, but they skip the seconds your encoder took to reconnect. A short drop in your building's own connection is covered the same way: your encoder has to reconnect, and your stream stays open for 15 minutes while it does.
- Do we need Church Management to stream?
- No. Streaming works on its own; choose it when you sign up. Recordings are saved to your church's Files, and Files storage comes with Church Management, so without it your services still stream but recordings are not kept.
- Can we get help if something goes wrong?
- Yes. Support is available 24/7.